Tools

Workbench Router Table Insert

June 2, 2016June 2, 2016Stuart

Due to the size of my workshop, I didn't have room for a freestanding router table, I typically favor one end or the other of my workbench, not usually the middle. So i built in the router table, the fence is removed and stored with other router accessories under the bench when not in use. (Just realized i took the pic before screwing in the miter track, its done now, I have also closed in the front so that it matches the rest of the workbench.)

Fireplace Gas Handle

June 2, 2016Stuart

When our gas handle was MIA on a cold night (Thanks to a curious toddler, Don't worry, it wasn't anywhere near the valve). I whipped this one up real quick with some scrap wood and steel tube I had. I believe the wood is poplar.

Screwdriver Replacement handle

June 2, 2016June 2, 2016Stuart

Replacement handle for a cheap-o mini screwdriver i use while working on computers, electronics, and anything else that has tiny screws. The original handle was crappy plastic, and too skinny to really fit my hand. The wood is some sort of stabilized burl... just grabbed it out of my scrap bin.

Shop Light Mods

June 2, 2016June 2, 2016Stuart

Just a cheap LED shop light picked up from harbor freight. I didn't like having to plug it up to charge, so made a contact based charging station for it. The base is MDF with a large nut inset (the light has a magnetic base) and 2 screws as the contact points. The light base has 2 screws counter-sunk in it as well and wired to the charging port.

Welder Upgrades

June 2, 2016June 2, 2016Stuart

Converted my cheap 15 year old Chicago electric welder to DC electrode negative. I haven't done much welding in the past due to the quality(or lack there-of) of this welder, but after this mod, i have to say it lays down some pretty nice beads. I haven't had any projects requiring welding yet, but i'll add some pics when I do. There's plenty of information on the interwebs about how to do this mod. but contact me if you have any questions.

Workshop re-arranging

June 2, 2016June 2, 2016Stuart

Just re-arranged my workshop last week, Gives me a little more floor space, easier access to my lathe, drill press, and bandsaw. I also took the opportunity to organize my planes and chisels. Only picture so far, I'll add more soon.

Axe Restoration and Sheath

June 2, 2016June 2, 2016Stuart

Stripped the head, sharpened, polished, and painted, gave it a handle, branded my name into it, and then made a custom sheath.